DIGITAL FILE for Better Backup Camera Hood

THIS IS DIGITAL DOWNLOAD FOR Better Backup Camera Hood enhances your nighttime driving experience with the Volkswagen ID.4. This product helps to improve your backup camera picture by effectively blocking unwanted light from getting into the camera lens.

Can be printed on FDM(fiament) printer or on resing printer.

Please print in flar orientation with supports. Prusa MK3S sliced G-code is included

A Better Backup Camera Hood is engineered to fit seamlessly with your Volkswagen ID.4, ensuring a perfect and secure fit.

A Better Backup Camera Hood is easy to install, no tools or equipment are required. Simply attach it to the back of your vehicle using the included double-sided tape, and you're ready to go! Once installed, you may notice an improvement in your backup camera's picture quality, in low-light conditions.

Join thousands of ID.4 owners around the world and upgrade your Volkswagen ID.4 with A Better Backup Camera Hood today and experience safer driving.

What the camera hood may help with(as reported by other owners):
- prevent rain from getting onto the camera lens
- keep the camera lens clean from dirt

Compatible vehicles:
2021-2022-2023 VW ID4
2021-2022-2023 Skoda Enyak
2021-2022-2023 Audi Q4 e-tron
2015 Audi Q5
compatibility list will be expanded as I do more testing

See the field test of A Better Backup Camera Hood here: https://youtu.be/UWJfIK0xwXY

Installation:
Watch the video here: https://youtube.com/shorts/RakVoucN3JA

- make sure to warm up a camera housing to 60F(15C) if you park your car outside
- clean the camera housing from loose dirt and dust
- using included alcohol prep pad clean the camera housing, and let the alcohol dry
- practice “dry fit” a couple of times, make sure A Better Camera Hood sits tight, and do not use too much force, you may break it
- carefully peel off the backing paper from the tape
- attach the camera hood to the backup camera housing, and keep gentle pressure on the area where the tape is for about 20-40 seconds to assure good adhesion.
- do not disturb the camera hood for 48-72h
ATTENTION: the tape allows only one attempt. If you put it on and had to remove it due to whatever reason, you NEED to get a new piece of tape, otherwise camera hood will fall off