How to install front LED badge
1. Remove the non-lit badge by pushing on to the teeth and pushing it out.
2. Guide the whole ring of the LED badge through the opening making sure it does not catch on anything
3. Gently click in LED badge
4. Install top bolt with 8mm socket or open wrench
5. Unplug one connector from the light bar by pulling out great security tab then squeezing it and pulling connector out
6. Plug light bar connector into the LED badge harness(same side) until it clicks, push in security tab
7. Plug in the other end of the same harness into the light bar and push in security tab.
8. Repeat for the other side.
9. Test: turn on the car, turn on headlights.